Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
phase to 
phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformationGuo, B.*; Mao, W.; Chong, Y.*; Shibata, Akinobu*; Harjo, S.; Gong, W.; Chen, H.*; Jonas, J. J.*; Tsuji, Nobuhiro*
Acta Materialia, 242, p.118427_1 - 118427_11, 2023/01
Times Cited Count：7 Percentile：61.61(Materials Science, Multidisciplinary)Kakiuchi, Kazuo; Amaya, Masaki; Udagawa, Yutaka
Journal of Nuclear Materials, 573, p.154110_1 - 154110_7, 2023/01
Times Cited Count：0 Percentile：0.01(Materials Science, Multidisciplinary)Motooka, Takafumi; Kiuchi, Kiyoshi
Corrosion, 58(8), p.703 - 709, 2002/08
Times Cited Count：11 Percentile：57.55(Materials Science, Multidisciplinary)Ti-5Ta alloy and zirconium with excellent corrosion resistance to nitric acid have been used as equipment materials in spent fuel reprocessing plants. However, zirconium has the susceptibility to stress corrosion cracking in nitric acid solutions. The fatigue crack growth rates of both metals were examined to clarify the effect of stress corrosion cracking on the fatigue crack growth in boiling 17% nitric acid. The fatigue crack growth behavior of Ti-5Ta alloy in nitric acid showed almost the same behavior as seen in air. The crack growth rate is slightly enhanced in nitric acid. The fracture surface showed the ductile striation with independence on the loading direction. On the other hand, the fatigue crack growth rate of zirconium is remarkably accelerated in nitric acid. The fatigue crack growth was affected by the cracking mode composed of the pseudo-cleavage and plastic deformation. The difference in fatigue cracking behavior on both metals in nitric acid is interpreted with the difference in a cross slip system and the corrosion resistance in nitric acid.
Motooka, Takafumi; Kiuchi, Kiyoshi
Materials Transactions, 43(5), p.1220 - 1224, 2002/05
Times Cited Count：2 Percentile：23.92(Materials Science, Multidisciplinary)Refractory materials such as zirconium, niobium and titanium alloys with excellent corrosion resistance in boiling nitric acid have been selected for use as structural materials of spent fuel reprocessing equipment. The fatigue crack growth rates of these materials were investigated by load control tests as a function of the stress intensity factor range in boiling 3N nitric acid and in air at room temperature. The fracture surfaces were observed by SEM. The fatigue crack growth rates of zirconium and niobium were enhanced in boiling nitric acid compared with those in air at room temperature. Acceleration effect due to corrosion fatigue was not observed in the crack growth of Ti-5Ta alloy. The fracture surfaces of Ti-5Ta alloy showed the ductile striation in both environments. On the other hand, the fracture surfaces of niobium represented the fatigue striation in air and the brittle striation due to corrosion in nitric acid. The fracture surfaces of zirconium in nitric acid showed brittle fracture and the ductile fracture related to stress corrosion cracking.
Nagase, Fumihisa; *; Komatsu, Kazushi*; Furuta, Teruo
JAERI-Review 95-012, 122 Pages, 1995/08
JAERI-Review-95-012.pdf:4.42MB
no abstracts in English
Maeda, Atsushi; ; Omichi, Toshihiko
Journal of Alloys and Compounds, 179, p.L21 - L24, 1992/00
Times Cited Count：17 Percentile：92.86(Chemistry, Physical)no abstracts in English
